Frequency: 145.160-
Tone: 123.0hz (required for analog)
C4FM ID: 00 (required for C4FM/Wires-X)
Location: Staunton, Va, USA
Grid Square: FM08kd
Station Call: KG4TIH
WIRES-X Node: KG4TIH-RPT (18558)
Default Room: VIRGINIA (21625)
Transmit Power: 50w
Coordination: SERA
Frequency: 444.200+
Tone: 123.0hz (required for analog)
C4FM ID: 00 (required for C4FM/Wires-X)
Location: Staunton, Va, USA
Grid Square: FM08kd
Station Call: KG4TIH
WIRES-X Node: KG4TIH-RP7 (71492)
Default Room: STAUNTON-LINK (81429)
Transmit Power: 50w
Coordination: SERA
Note: Frequency is subject to change. Although it's been quite a while without issue so it's probably fine here.
Frequency: 145.785 (Simplex)
C4FM ID: 00 (required for C4FM/Wires-X)
Location: Sterling, Va, USA
Grid Square: FM19ha
Station Call: KG4TIH
WIRES-X Node: KG4TIH-ND3 (71429)
Default Room: VA-Sterling (28558)
Transmit Power: 40w
Coordination: N/A
After a bit of moving hardware around my 449.375 Wires-X repeater is back online.
Frequency: 449.375-
Tone: 110.9hz (required for analog)
C4FM ID: 00 (required for C4FM/Wires-X)
Location: Sterling, Va, USA
Grid Square: FM19ha
Station Call: KG4TIH
WIRES-X Node: KG4TIH-ND (18558)
Default Room: VIRGINIA (21625)
Transmit Power: 50w
Coordination: TMARC
I've turned off the VA-Sterling room for now as I've got my node defaulting to the Virginia room with a few other nodes in the state.
The Sterling, VA, USA repeater and WIRES-X node is now up and operational.
It is a full duplex WIRES-X node, C4FM Repeater, and FM Repeater in FM19ha run by KG4TIH.
Sterling, Va now has a Wires-X node (100% digital with full control) on 439.800MHz.
Note: If/when coordinated frequencies come in and the associated repeater is up, the frequencies will change.